抽油机变速运行智能控制技术深化研究与应用

探究了抽油机合理的下冲程时间比,建立了多控制目标与自寻优相结合的抽油机井变速运行智能控制模型;应用功率峰值平衡度与功率均值平衡度,提出了判断抽油机井平衡度的新方法,解决了峰值电流法因反向发电而无法准确判断抽油机井平衡度的问题,实现了抽油机井平衡度的实时监测与调整;设计了前端控制与后台云端分析相结合的变速运行控制方案,弥补了抽油机变速运行智能控制技术井况适应区间狭窄,控制策略可变参数单一的局限性,拓展了井况适用范围,取得了良好的节电、增油效果。     

基于深度学习的秀丽隐杆线虫显微图像分割方法

利用计算机实现自动、准确的秀丽隐杆线虫(C.elegans)的各项形态学参数分析,至关重要的是从显微图像上分割出线虫体态,但由于显微镜下的图像噪声较多,线虫边缘像素与周围环境相似,而且线虫的体态具有鞭毛和其他附着物需要分离,多方面因素导致设计一个鲁棒性的C.elegans分割算法仍然面临着挑战。针对这些问题,提出了一种基于深度学习的线虫分割方法,通过训练掩模区域卷积神经网络(Mask R-CNN)学习线虫形态特征实现自动分割。首先,通过改进多级特征池化将高级语义特征与低级边缘特征融合,结合大幅度软最大损失(LMSL)损失算法改进损失计算;然后,改进非极大值抑制;最后,引入全连接融合分支等方法对分割结果进行进一步优化。实验结果表明,相比原始的Mask R-CNN,该方法平均精确率(AP)提升了4.3个百分点,平均交并比(mIOU)提升了4个百分点。表明所提出的深度学习分割方法能够有效提高分割准确率,在显微图像中更加精确地分割出线虫体。     

植物浸取剂原地浸出离子型稀土矿中试模拟

分别以“散样重装”和保持矿体原样的离子型稀土矿为原料，开展植物浸取剂浸出稀土的小试和“原地浸出”中试模拟试验。探讨了试验动力学，探索了植物浸取剂浓度和用量对浸出的影响，并它的渗透性和浸取性能与硫酸铵为浸出剂时的进行了对比。结果表明，植物浸取剂浸出稀土过程的动力学符合“收缩未反应核模型”；128.2 kg浓度为2%植物浸取剂浸出451 kg稀土矿是合适的；保持矿体原样的稀土矿渗透性较差，植物浸取剂的水平平均渗透速度、垂直平均渗透速度、浸出率分别为0.141 cm/min、0.213 cm/min、94.40%，均好于硫酸铵的。     

Thermomechanical properties of alumina-filled plasticized polylactic acid: Effect of alumina loading percentage

Polylactic acid (PLA) is one of the most widely studied renewable and biodegradable polyesters and is expected to replace petrochemical-based synthetic polymers. In this study, we investigated the effect of the alumina volume fraction on the thermal and mechanical properties of polyethylene glycol (PEG)-plasticized PLA. The alumina particles were treated with maleic acid to improve their interaction with the PLA matrix. The field-emission scanning electron microscopy results revealed that the addition of alumina eliminated voids, leading to improved interfacial interactions between the PLA and alumina particles. The thermal conductivity of the neat PLA increased from 0.278 to 0.66?wm^?1 k^?1 with the addition of 30% alumina, which accounts for 137% increase. The tensile strength and Young's modulus of the neat PLA dropped by 52% and 56%, respectively, on the addition of 15% PEG plasticizer. However, the elongation at break increased from 5.4% to 207%, which was associated with a drop on the glass transition temperature values. The dynamic mechanical analysis results showed a drop in the storage modulus and height of the tan δ peak, revealing the increased flexibility of the composite after the inclusion of the plasticizer. The addition of 30% alumina exhibited a 41.6% increase on the stiffness of the PEG-blended PLA.     

Use of cellular confinement for improved railway performance on soft subgrades

Due to extensive right-of-way, railroads are inevitably subject to poor subgrade conditions and interrupted service for significant maintenance due to excessive deformations and loss of track geometry. Geocell confinement presents itself as a possible solution for improving performance of ballasted railroad embankments over weak subgrade. To investigate the efficacy of geocell confinement on ballasted railway embankments, a set of well-instrumented, large-scale cyclic plate loading tests and numerical simulations were performed on geocell-confined ballast overlaying a weak subgrade material. The agreement of results from tests and simulations served as a basis for simulating practical track geometry and performance for various geocell configurations and subgrades using three-dimensional (3D) finite element (FE) analyses. The study showed that geocell reinforcement significantly decreased track settlement, decreased subgrade deformations with lower and uniform distribution of vertical stresses on subgrade and inhibited lateral deformation and serviceability under cyclic loading. These results demonstrate that geocell confinement can be an effective alternative to subsurface improvement or shorter maintenance cycles, particularly on weak subgrades.     

新疆钢铁产业集中度浅析

钢铁产业集中度是反应行业发展水平的重要指标。文章重点介绍了2016年以来新疆钢铁产能布局和钢铁企业生产情况,分析了新疆钢铁产能利用率和产业集中度,就今后新疆钢铁产业集中度指标提出了建议。     

Structural-microstructural characterization and optical properties of Eu3+,Tb3+-codoped LaPO4·nH2O and LaPO4 nanorods hydrothermally synthesized with microwaves

Rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄·nH₂O single-crystal nanorods with the compositions La_0.99999-xEu_xTb_0.00001PO₄·nH₂O (x?=?0–0.03), La_0.99999-yTb_yEu_0.00001PO₄·n′H₂O (y?=?0–0.010), and La_0.99999-zTb_zEu_0.000007PO₄·n′′H₂O (z?=?0–0.012) were hydrothermally synthesized with microwaves. It is shown that the Eu³⁺,Tb³⁺ codoping does not affect the thermal stability of these nanorods, which is due to the formation of substitutional solid solutions with both Eu³⁺ and Tb³⁺ replacing La³⁺ in the crystal lattice. Moreover, it is also shown that monazite-type Eu³⁺,Tb³⁺-codoped LaPO₄ single-crystal nanorods can be obtained by calcining their rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄·(n,n′ or n′′)H₂O counterparts at moderate temperature in air, and that they are thermally stable. It is also observed that, for the same Eu³⁺,Tb³⁺-codoping content, the monazite-type Eu³⁺,Tb³⁺-codoped LaPO₄ nanorods exhibit higher photoluminescent efficiency than the rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄· (n,n′ or n′′)H₂O nanorods. Moreover, it is found that the highest photoluminescence emission corresponds to the monazite-type La_0.96999Eu_0.02Tb_0.00001PO₄ nanorods for the La_0.99999-xEu_xTb_0.00001PO₄ system. However, for those compositions energy transfer from Tb³⁺ to Eu³⁺ does not occur. In addition, for an efficient energy transfer to occur, a content of at least 1?mol% Tb³⁺ is needed in all the studied materials.     

Online monitoring of laser remelting of plasma sprayed coatings to study the effect of cooling rate on residual stress and mechanical properties

This investigation deals with laser remelting of plasma sprayed alumina and chromia coatings. The time-temperature history of the laser remelted zone was recorded using an infrared pyrometer during the remelting operation. Cooling rates, under varying scanning speed, were determined from the time temperature curve. Surface morphology, microstructure, and phases of the laser treated and as-sprayed coatings were characterized using scanning electron microscopy, optical microscopy, X-ray diffraction, respectively. X-ray diffraction was also employed to measure the surface residual stress of the coatings. Inherent features of plasma sprayed coatings like porosity and inter-lamellar boundary were obliterated upon laser remelting. A columnar grain growth perpendicular to the laser scanning direction was observed. The range of roughness of the as-sprayed coatings reduced from 6 to 8?µm to 1–2?µm in the remelted layers. For both coatings, more than 90% reduction in porosity was found upon laser remelting. Surface residual stress of the as-sprayed alumina and chromia coatings was found to be tensile and compressive, respectively. Within the limits of the testing condition the tensile residual stress of the remelted layers increased by up to around 500% in the alumina coatings. In the chromia coating a decrease of compressive stress by up to around 80% was recorded. In the remelted layer the tensile nature of the stress showed a tendency to increase with an increase in the cooling rate. However, the state of stress of the as-sprayed layer, i.e., tensile or compressive, was retained in the remelted layer. The residual stress was found to decrease in the remelted layer with an increase in the degree of overlap of the remelted tracks.